top of page

Oil Pumps,

Pressure Ratio 1:1

Oil Pumps,

Pressure Ratio 3:1

Oil Pumps,

Pressure Ratio 5:1

Air Operated Diaphragm Pump DF50 

Air Operated Diaphragm Pump DF100

Pumpmaster 1 Fluid Transfer Pump

Wall Mounted Pumpmaster 2

3:1 Pressure Ratio Pumps 

Pressurized Lubricant Dispensers 25 Ltrs

Oil Suction Guns

Model: 351 120

 

Double acting air operated low pressure pumps for transferring lubricants and other non-corrosive fluids. Pumps include height adjustable bung adaptor 2" BSP (M) for tank or drum mounting.

 

Typically used in all types of industries for fast and clean transfer of lubricants.

 

 

PRODUCTS HANDLED:

 

- SYNTHETIC AND MINERAL BASED LUBRICANTS

- TRANSMISSION FLUID

- HYDRAULIC OIL

- DIESEL

-  GREASE UP TO NLGI - 2 (LONG PUMP ONLY)

 

MARKETS:

 

- VEHICLE MAINTENANCE CENTRES

- FLEET SERVICE FACILITIES

- MANUFACTURING PLANTS

- AGRICULTURE

- MARINE

- MINING AND CONSTRUCTION

 

 

Model: 353 120

 

Double acting air operated medium pressure pumps for dispensing lubricants from mobile units, oil distribution packages and small systems. Pumps are capable of pumping all types of lubricants, even those of high viscosity. Pumps include height adjustable bung adaptor 2" BSP (M) for tank or drum mounting, and a built in port for connecting a pressure relief valve (PN 609 007).

 

PRODUCTS HANDLED:

 

- SYNTHETIC AND MINERAL BASED LUBRICANTS

- GEAR OIL

- HYDRAULIC OIL

- TRANSMITTION FLUID

 

MARKETS:

 

- VEHICLE MAINTENANCE CENTRES

- FLEET SERVICE FACILITIES

- MANUFACTURING PLANTS

- AGRICULTURE

- MARINE

- MINING AND CONSTRUCTION

 

 

Model: 347 120

 

Double acting air operated high pressure pumps for dispensing lubricants in large size installations including multiple dispensing points with simultaneous operation. Pumps are capable of pumping all types of lubricants, even those of high viscosity. Pumps include height adjustable bung adaptor 2" BSP (M) for drum and tank mounting and a built in port for connecting a pressure relief valve(PN 609 007). Typically used in workshops, service stations, fast lube centres, fleet maintenance in mining, agriculture, armed forces, construction, trains, etc, in medium large installations even with simultaneous operation outlets.

 

PRODUCTS HANDLED:

 

- SYNTHETIC AND MINERAL BASED LUBRICANTS

- GEAR OIL

- HYDRAULIC OIL

- TRANSMITTION FLUID

 

MARKETS:

 

- VEHICLE MAINTENANCE CENTRES

- FLEET SERVICE FACILITIES

- MANUFACTURING PLANTS

- AGRICULTURE

- MARINE

- MINING AND CONSTRUCTION

 

Model: 552 013

 

For fluid transfer and distribution systems. Very robust construction. The pump is fully enclosed in a shield and has non-metallic parts.

 

 

Model: 551 010

 

For fluid transfer, evacuation and distribution systems. 100 l/min - 28 US gpm fluid port

Very robust construction, the pump is fully enclosed in an aluminum shield.

 

Model: 551 010

 

Small but very versatile air operated transfer pump compatible with a wide range of slightly corrosive fluids such as detergents, windshield wash, light inks, water based paint, ink and varnish, etc.

Includes air needle valve at the air inlet for adjusting the pump speed. Mounting thread 3/4" BSP (M)

 

 

Model: 379 000

 

The wall mounted pump and the suction assembly allows a fast and clean drum replacement.

Includes: 

- Stub pump

- PumpMaster 2 connection kit for 3:1 pumps

- litres drum suction kit for wall mounted pumps

 

Model: 324 000

 

Mobile unit for dispensing viscous lubricants, with 25 L (6.6 US gallon_ steel container and 

level gauge. The unit must be pressurized using a tyre inflator (max pressure bar 7 bar - 100 psi, safety valve included). Supplied with a 1.5m delivery hose and oil control gun, digital electronic hose end meter, with flexible outlet and manual non-drip nozzle.

Model: 113  910

 

Oil suction gun 800 cc with 290 mm 06# hose.

 

For lubricant suction and discharge for loading or refilling transmissions, gear boxes, filters, etc.

 

bottom of page