K33 - Atex Explosion Proof

K33- 34 Mechnical Meters

K24 Electronic Pulse Meter

K200 Electronic Meters

and Pulses

K600/4 Electronic

Meters and Pulses

New mechanical meter for accurate measurements of the quantitiy dispensed within private applications (gasoline, kerosene, diesel), meets the ATEX requirements, related to the use of materials in potentially explosive atomospheres.

 

It is reliable, economical, easy to install and cn be calibrated on-site.

Furthermore, it can perform well under gravity thanks to the low flow resistance. The K33 ATEX meter can be installed in both rigid and flexible pipes or directly on pumps and tanks.

 

The equipment is classified as follows:

Group II, category 2 G IIB T = 85°C(T6), so the flow meter is suitable for working in areas classified as 1 and 2 in accordance with directive 99/92/CE.

Designed to measure the exact quantity of dispensed liquid (Fuel or lubricant) for non commercial use. Reliable, economical and easy to install and calibrate on site. Also, gravity functional thanks to reduced resistance to flow.

 

Mod. K33, 3 digit partial totals (max 999 litres), 6 digit totals

 

Mod. K44 , 4 digit partial totals (max 9999 litres), 7 digit totals

Digital flow meters for low-viscosity fluids. Easy to instal in line or at the end of a delivery pipe, equiped with a screen that can be adjusted to various positions for easy reading. The dieal instrument for controlling fluid dispensing. Sturdy casing and a sealed electronic card make it suitable for use in all conditions. 

Oval gear electronic flow meters in acetal resin for controlling the non commerical dispensing of low, medium and high viscosity fluids including fuel, lubricationg oil and other special fluids compatible with construction materials. Body with aluminium measuring chamber. Free contact signal pulser (reed switch), single channel. 5 digit partial total (H=11.5mm) with floating point from 0.001 - 999.99. 8 digit non resetable total (H=5mm) from 1 - 9999999.

 

Performance:

 

- Repeatability 0.2%,

- Loss of pressure < 0.5 bar at a maximum flow rate,

- Flow rate: 2.5l/min

- Accuracy +/- 0.5%

Oval gear electronic flow meters in acetal resin for controlling the non commerical dispensing of low, medium and high viscosity fluids including fuel, lubricationg oil and other special fluids compatible with construction materials. Body with aluminium measuring chamber. Free contact signal pulser (reed switch), single channel. 5 digit partial total (H=11.5mm) with floating point from 0.001 - 999.99. 8 digit non resetable total (H=5mm) from 1 - 9999999.

 

Resetable total. Flow rate indication

 

Performance:

 

- Repeatability 0.2%

- Loss of pressure < 0.5 bar at a maximum flow rate.

- Flow rate: 150l/min

- Accuracy +/- 0.5%

© 2020 Ambar Enterprises Ltd